When looking to build a prefab or modular home in Hawaii, it is likely that you will have questions about the possibilities, limitations, and process involved in building a prefab or modular home in Hawaii. Our guide to building prefab and modular homes in Hawaii aims to address key questions that you may have like, “how much will it cost to build a prefab home in Honolulu? What prefab home manufacturers serve Hawaii and what are their strengths?”. Luckily our Guide to Building Prefab and Modular Homes in Hawaii has you covered. Within Hawaii, we cover the islands of Oahu, Hawaii, Maui, and Kauai. Continue reading to learn more about the prefab and modular home building process in Hawaii or for more specific advice, connect with one of our prefab home experts here.

Why Might You Want to Build a Prefab Home in Hawaii?

• Quick Build Times - because prefab and modular homes are manufactured off-site and assembled at the final build site, multiple steps of the project can be completed simultaneously and more efficiently than a traditional home build. As a result, build times are often significantly less than traditional, site-built homes.

• Cost Controlled - using a highly controlled build process (homes are manufactured in climate-controlled production and cutting facilities), unforeseen cost overruns can be better managed leading to reduced overall cost. This is especially necessary for expensive areas in Hawaii like Honolulu

• Sustainable & Modern - a majority of the prefab and modular home manufacturers that serve Hawaii can build energy efficient, net-zero homes. Additionally, it is possible to get a prefab home from these manufacturers that features modern designs, and high-tech elements and appliances

Key Decisions to Make:

• Home Location - while the initial cost to build a prefab home may be high in Oahu and Maui, especially in areas of Honolulu, a newly-built prefab home in these areas can be a sound long-term investment. When considering where exactly to build your home, you should be mindful of a few things that could affect your project:

  • Slope of lot - steep hills can make it difficult to build most pre-designed prefabs

  • Set back requirements which can limit the buildable area of your property

  • Floor area ratio or other zoning protocols that may affect the size of the home 

  • Whether or not your neighborhood requires a design review

• Custom vs. Standard - While most builders offer a set of pre-designed floor plans, while some also offer options for partial or total home customization. Other builders may specialize in custom prefab home designs. If you live on a tricky lot (uneven terrain, small-lot size, etc.) you may face a limited offering of standard home designs that are suitable for your home build

• Modular vs. Kit Home v.s. Panelized - While all three of these construction techniques qualify as prefab home building techniques, there are nuances that you should know when building your own prefab house. These prefab home styles include:

  • Modular - homes are made up of multiple box-like modules. These modules are fully manufactured and assembled off-site and consist of floors, walls, ceilings, wiring, plumbing, and internal fixtures. After being assembled in an off-site facility, they are shipped to your desired location and the modules are connected and fastened to the foundation. Modular construction is one of the most affordable and quickest prefab building techniques due to the high degree of work completed off-site.

  • Kit Home - all materials and components necessary for building a home are pre-measured, cut, and delivered to the build site. In some cases, an owner builder can assemble the kit home themselves as a cost-saving method.

  • Panelized - the home’s structural components: walls, floor, ceiling, are manufactured separate from one another in an off-site location. From there, they are shipped and constructed at the final site like a traditional build. While somewhat similar to modular construction, panelized building offers more flexibility in the home build process.

    • Some builders advertise using Structural Insulated Panels (SIPs) which are a 2-in-1 combination of high-efficiency insulation and structural panels. This allows for the creation of a quick, energy-efficient prefab home.

• Architect/manufacturer vs. All-in Company - There are many steps in the prefab home build process. Major steps include land acquisition, home design, manufacturing, and assembly. When selecting a company for your prefab home, you should also pay attention to the services your company offers. In some cases the company you choose may only offer a home design and therefore sub-contract out the manufacturing process, though this is not as common as homes that offer both home design and manufacturing. This type of company however, still leaves you responsible for acquiring land and later finding a local builder to complete necessary site work and finish your home at the project site. It is worth noting that there are several companies that offer all-in-one services and can assist you in all stages of the home-build process including design, manufacturing, site work, and finishing your home. 

• Financing your home - unless you are planning to pay for your home in cash, you are likely going to need outside financing for your prefab home. The two most common ways of financing a prefab home build are:

  • construction loan - a short term loan that you can refinance once construction is complete

  • temp to perm loan - a construction loan for the duration of construction that converts to a normal mortgage once your house is finished. The advantage of these loans is you only have one mortgage close vs. two with just a construction loan.

  • These methods usually allow you to finance both the land purchase and the construction of your home however, the underwriting and approval process on these loans can be lengthy (60+ days) as the bank is not only underwriting you as a borrower, but also the viability of your building plans. To get land more quickly, buyers will often pay cash for their building lot and then the lender will credit the land purchase as a down payment percentage on the purchase.

  • Some of the best lenders for these products only operate regionally. If you would like assistance specific to your situation, we can provide recommendations here.

  • If you’re looking to purchase an ADU (accessory dwelling unit) or tiny home, then you may want to consider a personal loan:

    • Many personal lenders allow you to borrow up to $100k with no down payment

    • These loans are typically amortized over a shorter period than mortgages (up to 12 years)

    • These loans typically don’t underwrite the property and instead underwrite you as a borrower

    • Many of the best personal lenders are online and serve almost the entire country

    • The time to get approved for a personal loan is generally pretty fast (as little as a day to up to a couple weeks)

Common Questions

• How much will it cost to build a prefab house in Hawaii on the islands of Oahu, Hawaii, Maui, and Kauai?

  • While certain variables such as location, builder, and floor plan will affect the total cost of building your home, it is our experience that the final cost of your prefab will range between $175 - $500 per square foot (as of April, 2021).

• Is a prefab home a good investment?

  • Yes, in areas where the total cost of building your prefab home (land cost + building costs)  is less than the average dollar per square foot sales price of homes in your neighborhood i.e. you are able to sell your home for more than it cost to build it. In Hawaii, this can range from $420 per square foot on the Island of Hawaii, to $500 per square foot on the islands of Kauai and Maui, and more expensively $675 per square foot in some areas of Honolulu. It is important to note that the hardest part of a project in these areas is finding buildable land or even lots suitable for teardown that will work within the price range and timeframe of your project.

• Can I finance a prefab home in Hawaii? 

  • Yes. The most common way to finance a prefab home is a temp to perm loan. This financing method starts out as a loan for the construction of your home and converts to a mortgage once your home is completed. Another financing option is a construction loan which is a short-term loan that you then refinance once the construction process is finished. 

• What do the economics of an investment in a prefab home look like?

  • Our spreadsheet (below) is an example of what the costs and potential benefits of a prefab home investment might look like. While there may be high up-front costs, it is likely there will be a sizable return on your investment. In high-demand areas of Oahu, Maui, and Kauai one of the most challenging parts of the build process is finding a buildable lot at a reasonable price. In some cases it might be cheaper to buy and tear-down an existing home rather than purchase a vacant, build-ready lot.

How long will it take?

• The answer to this question depends a lot on your particular location. Your city’s permitting and building process will play a large role in determining the timeframe for your build. Total, the build process can take between 1-2 years and maybe longer if there is a design review process.

• Planning Departments in Hawaii:

  • Honolulu

  • Hawaii County

  • Maui County

  • Kauai

Reputable Companies that Serve Hawaii Including the Islands of Oahu, Hawaii, Maui, Kauai:

• Teak Bali

  • Turn-key company based on Hawaii offering tropical design homes

  • All-in-cost: $175 - $360 per sqft

• Bamboo Living

  • Design unique, environmentally friendly, and bamboo-based homes

  • Based in Pahoa, Hawaii

  • All-in-cost: $200 - $375+ per sqft

• Method Homes

  • Designs and manufactures a range of modern and sustainable homes in addition to fully-custom projects

  • All-in-cost: $300 - $500+ per sqft

• Purcell Timber Frame Homes

  • Designs and manufactures timber frame home exteriors in a variety of styles and sizes with the option for full customization

  • All-in-cost: $300 - $400 per sqft

• Turkel Design

  • Design both standard and custom high-end prefab and modular homes that can be shipped worldwide

  • All-in-cost: $300 - $500+ per sqft