Our guide to building prefab and modular homes in the Nashville, Tennessee area is designed to be a resource that can help you better understand the prefab home build process in Northern Tennessee. We understand that undertaking a prefab home build can be a daunting project and raise questions ranging from, “Where can I build a prefab home in Nashville?” to “How much will it cost to build a prefab home in Nashville?” As such, our guide addresses the most important topics you should consider when deciding whether or not a prefab home is right for your situation. Our guide to building prefab and modular homes in Nashville covers the neighborhoods of Green Hills, Bellmont Hillsboro, Hillsboro West End, and Hillwood Estates and also includes other cities in the area such as Hendersonville and Brentwood. Continue reading below to better understand the prefab and modular home building process in Nashville or connect with one of our Prefab Concierge experts for project-specific advice here.

Why Might You Want to Build a Prefab Home in the Nashville Area

• Quick Build Times - prefab and modular homes are manufactured off-site and assembled at the final build site which allows for multiple steps of the project to be completed simultaneously and more efficiently than a traditional home build. This often results in shorter build times than traditional, site-built homes.

• Cost Controlled - using a highly controlled build process (homes are manufactured in climate-controlled production and cutting facilities), unforeseen cost overruns can be better managed leading to reduced overall cost. This is especially necessary for high cost areas of Nashville such as Green Hills, Bellmont Hillsboro, Hillsboro West End, Hillwood Estates and suburbs like Hendersonville and Brentwood.

• Sustainable & Modern - many of the prefab and modular home manufacturers that serve Nashville and the surrounding areas offer energy efficient, and in some cases, net-zero homes. Many of these manufacturers also offer modern designs, and high-tech elements and appliances.

Key Decisions to Make:

• Home Location - while the initial cost to build a prefab home may be rather high in the neighborhoods of Green Hills, Bellmont Hillsboro, Hillsboro West End, and Hillwood Estates, a newly-built prefab home in these areas or Hendersonville or Brentwood can be a sound long-term investment. Alternatively, in some areas with cheaper land costs but relatively high home costs, a prefab home can also be a sound investment. When considering where exactly to build your home, you should be mindful of a few things that could affect your project:

  • Slope of lot - steep hills can make it difficult to build most pre-designed prefabs, and may require a custom designed and engineered home

  • Set back requirements which can limit the buildable area of your property

  • Floor area ratio or other zoning protocols that may affect the possible size of the home 

  • Whether or not your city requires a design review

• Custom vs. Standard - While most builders offer a set of pre-designed floor plans, while some also offer options for partial or total home customization. Other builders may specialize in custom prefab home designs. If you live on a tricky lot (uneven terrain, small-lot size, etc.) you may face a limited offering of standard home designs that are suitable for your home build

• Modular vs. Kit Home v.s. Panelized - While all three of these construction techniques qualify as prefab home building techniques, there are nuances that you should know when building your own prefab house. These prefab home styles include:

  • Modular - homes are made up of multiple box-like modules. These modules are fully manufactured and assembled off-site and consist of floors, walls, ceilings, wiring, plumbing, and internal fixtures. After being assembled in an off-site facility, they are shipped to your desired location and the modules are connected and fastened to the foundation. Modular construction is one of the most affordable and quickest prefab building techniques due to the high degree of work completed off-site.

  • Kit Home - all materials and components necessary for building a home are pre-measured, cut, and delivered to the build site. In some cases, an owner builder can assemble the kit home themselves as a cost-saving method.

  • Panelized - the home’s structural components: walls, floor, ceiling, are manufactured separate from one another in an off-site location. From there they are shipped and constructed at the final site like a traditional build. While somewhat similar to modular construction, panelized building offers more flexibility in the home build process.

    • Some builders advertise using Structural Insulated Panels (SIPs) which are a 2-in-1 combination of high-efficiency insulation and structural panels. This allows for the creation of a quick, energy-efficient prefab home.

• Architect/manufacturer vs. All-in Company - There are many steps in the prefab home build process. Major steps include land acquisition, home design, manufacturing, and assembly. When selecting a company for your prefab home, you should also pay attention to the services your company offers. In some cases the company you choose may only offer a home design and therefore sub-contract out the manufacturing process, though this is not as common as homes that offer both home design and manufacturing. This type of company however, still leaves you responsible for acquiring land and later finding a local builder to complete necessary site work and finish your home at the project site. It is worth noting that there are several companies that offer all-in-one services and can assist you in all stages of the home-build process including design, manufacturing, site work, and finishing your home. 

• Financing your home - unless you are planning to pay for your home in cash, you are likely going to need outside financing for your prefab home. The two most common ways of financing a prefab home build are:

  • construction loan - a short term loan that you can refinance once construction is complete

  • temp to perm loan - a construction loan for the duration of construction that converts to a normal mortgage once your house is finished. The advantage of these loans is you only have one mortgage close vs. two with just a construction loan.

  • These methods usually allow you to finance both the land purchase and the construction of your home however, the underwriting and approval process on these loans can be lengthy (60+ days) as the bank is not only underwriting you as a borrower, but also the viability of your building plans. To get land quicker, buyers will often pay cash for their building lot and then the lender will credit the land purchase as a down payment percentage on the purchase.

  • Some of the best lenders for these products only operate regionally. Therefore, if you would like assistance specific to your situation, we can provide recommendations here.

  • If you’re looking to purchase an ADU (accessory dwelling unit) or tiny home, then you may want to consider a personal loan:

    • Many personal lenders allow you to borrow up to $100k with no down payment

    • These loans are typically amortized over a shorter period than mortgages (up to 12 years)

    • These loans typically don’t underwrite the property and instead underwrite you as a borrower

    • Many of the best personal lenders are online and serve almost the entire country

    • The time to get approved for a personal loan is generally pretty fast (as little as a day to up to a couple weeks)

Common Questions

• How much will it cost to build a prefab house in Nashville or surrounding areas like Hendersonville or Brentwood?

  • While certain variables such as location, builder, and floor plan will affect the total cost of building your home, it is our experience that the final cost of your prefab will range between $100 - $445+ (as of June, 2020).

• Is a prefab home a good investment?

  • Yes, in areas where the total cost of building your prefab home (land cost + building costs)  is less than the average dollar per square foot sales price of homes in your neighborhood i.e. you are able to sell your home for more than it cost to build it. In the Nashville area that includes areas where the average price per square foot is $370 per sqft or higher. This includes multiple neighborhoods in Nashville such as Green Hills, Bellmont Hillsboro, Hillsboro West End, and Hillwood Estates. It is important to note that the hardest part of a project in these areas is finding buildable land or even lots suitable for teardown that will work within the price range and time frame of your project. For suburbs of Nashville like Brentwood or Hendersonville, the break-even point on an investment is much lower, and can be as low as $230 per sqft in areas with more affordable land.

• Can I finance a prefab home in the Nashville Area? 

  • Yes. The most common way to finance a prefab home is a temp to perm loan. This financing method starts out as a loan for the construction of your home and converts to a mortgage once your home is completed. Another financing option is a construction loan which is a short-term loan that you then refinance once the construction process is finished. 

• What do the economics of an investment in a prefab home look like?

  • Our spreadsheet (below) is an example of what the costs and potential benefits of a prefab home investment might look like. While there may be high up-front costs, it is likely there will be a sizable return on your investment. In high-demand areas of Nashville, one of the most challenging parts of the build process is finding a buildable lot at a reasonable price. In some cases it might be cheaper to buy and tear-down an existing home rather than purchase a vacant, build-ready lot.

• How long will it take?

  • The answer to this question depends a lot on your particular location. Your city’s permitting and building process will play a large role in determining the time frame for your build. Total, the build process can take between 1-2 years and maybe longer if there is a design review process.

  • Planning Departments in and around the Nashville Area:

    • Nashville

    • Brentwood

    • Hendersonville

Reputable Companies that Serve Nashville and the Surrounding Areas:

• Hygge Supply

  • Design and manufacture modern, Scandanavian-inspired prefab home kits

  • All-in-cost: $215 - $445 per sqft

• Honka

  • Design and manufacture modern, energy-efficient home kits with regional offices throughout the U.S.

  • All-in-cost: $225 - $350 per sqft

• Purcell Timber Frame Homes

  • Offer both standard and custom timber frame home kits that are designed for snowy areas

  • All-in-cost: $300 - $350 per sqft

• Acorn Deck House

  • Offer both standard and custom home designs as well as a regional network of local general contractors

  • All-in-cost: $285 - $420 per sq ft

• Deltec Homes

  • Based in Asheville, NC and offer a wide variety of energy efficient prefab home designs

  • All-in-cost: $175 - $300 per sqft

• Clayton Homes

  • Tennessee based manufacturer with over 100+ standard home designs

  • All-in-cost: $100 - $200 per sqft

• Icon Legacy

  • Manufacture prefab homes to a highly-finished state and work with a network of local builders to complete homes

  • All-in-cost: $150 - $300+ per sqft